Control Panel Engineering That Powers Process Plants
ECCT delivers control panel engineering, PLC/HMI software, instrumentation integration and commissioning support for process plants that need practical, startup-ready automation.
Core disciplines covered across panel engineering, automation software, field integration and startup support.
From Drawings to Startup
A delivery path from design inputs through FAT and site startup.
Scope control and requirement review
Analyze drawings, equipment and operating requirements.
Drawing discipline and signal coordination
Prepare panel layouts, control architecture and signal lists.
Assembly quality and component verification
Fabricate panels with component selection and assembly checks.
Logic review, permissives and alarm behaviour
Develop PLC, HMI and SCADA logic around the process sequence.
FAT evidence, I/O validation and issue closure
Run FAT checks, loop tests and functional validation.
Site startup, tuning and operator handover
Support startup, training and handover for reliable operation.
End-to-End Control & Automation Solutions
ECCT covers the panel, software, field-device and startup disciplines needed to turn a process concept into a working plant control system.
Control Panels & MCC Panels
Custom PLC, VFD and starter panels, MCCs, motor control centers and power distribution solutions.
- PLC panels
- MCC & VFD panels
- Power and control wiring
PLC, HMI & SCADA Automation
Siemens, Rockwell, Ignition and WinCC-based automation with advanced HMI and SCADA operation screens.
- PLC programming
- HMI development
- Alarming and trends
Instrumentation & Field Integration
Sensors, transmitters, flow, level, pressure and I/O integration with marshalling and panel design.
- Field devices
- I/O panels
- Loop checks
Testing, Commissioning & Startup
FAT, SAT, loop checks, functional testing and on-site commissioning with full documentation.
- FAT / SAT
- Loop checks
- Operator handover
Built for Process Industries
ECCT supports control and automation scopes for production lines, process plants and utility systems.
Food & Beverage
Water Treatment
Wastewater
Industrial UtilitiesA Proven 6-Step Process
Delivery is controlled through documented review, design coordination, panel verification, functional testing and structured startup support.
Scope control and requirement review
Analyze drawings, equipment and operating requirements.
Drawing discipline and signal coordination
Prepare panel layouts, control architecture and signal lists.
Assembly quality and component verification
Fabricate panels with component selection and assembly checks.
Logic review, permissives and alarm behaviour
Develop PLC, HMI and SCADA logic around the process sequence.
FAT evidence, I/O validation and issue closure
Run FAT checks, loop tests and functional validation.
Site startup, tuning and operator handover
Support startup, training and handover for reliable operation.
Recent Automation Success
Full Automatic CIP Unit
Sequence-based CIP automation integrating pumps, valves, field signals and operator control for repeatable cleaning cycles.
View project
Wastewater Treatment Plant
PLC and SCADA automation for treatment equipment, pumping, alarms and plant-wide operating visibility.
View project
Syrup Room Automation
Automated syrup preparation and transfer with coordinated tanks, valves, pumps and HMI operation.
View project